Interactive Rear Projection Film with Anti Glare Film

Interactive Rear Projection film displays can often be plagued by glare issues, the best way to combat this is using Anti Glare film on the viewing side of your display. Anti Glare film reduces glare and gives you wider viewing angles and an overall better viewing experience

Anti Glare Film Adhesive

The largest obstacle to clear and viewable window displays is the glare and reflection that comes standard with any glass or acrylic. By adding our Anti Glare film to your window or display you will dramatically reduce glare and reflection and ensure that your displays and products are fully visible.

Transparent Interactive Rear Projection Displays

Floating images that are interactive is not only possible in the world of Sci-Fi but now anyone can create full multi touch interactive rear projection film displays easily, Intrigue Rear Projection Film combined with either a Touch Foil or a Multi Touch Overlay can give you what use to only be possible through Hollywood effects for your next trade show and display.

Interactive Accent Rear Projection Film

Accent Rear Projection Film will make a low lumen projector look amazing but will also accept ultra bright projectors without hot spotting or losing viewing angles. Use accent with short throw lenses and mirror rigs and count on Accent projection films working perfectly every time. Accent Projection Films can also be used through tinted windows and smoked glass. Use Accent Rear Projection Film with a touch foil to have interactive through glass touch displays 

Definition Pro Interactive Rear Projection Film

Lightweight, through-glass Touch-Screen Film technology - applies to windows, glass surfaces, acrylic,Rear Projection Film Screens, and other non-metallic materials.Definition Pro Rear Projection film will give you high contrast, interactive displays in any lighting condition

Definition Rear Projection Films Adhesive

Definition rear projection film can be applied to any glass or acrylic surface with our built in adhesives and is available in large seamless sizes up to 122" 16:9 and 100" 4:3 giving you a wide selection of sizes and aspect ratios to choose from. Definition rear projection film can be tiled to make larger displays. Definition projection film also requires no specific projection angle. Interactive touch screen options are available and can be incorporated into any application utilizing rear projection films; simply apply a thin touch screen film and then apply your rear projection film onto the touch film. This thru glass touch screen solution and rear projection film can transform any storefront into an interactive digital glass display window TV

Rear Projection Film Accessories - Anti Glare Film

Anti Glare Film is placed on the outside or opposite side of the glass or acrylic than your rear projection film. Anti Glare Film reduces glare and reflection from the front side surface of your display, increasing brightness, widening viewing angles and giving your viewing audience a brighter and more even viewing experience.

See a Video Here 

Definition Pro Rear Projection Film Adhesive

http://www.rearprojectionfilms.com/rear-projection-film-definition

Definition Pro Rear Projection Film can be applied to any clear surface including glass, acrylic and plexiglas for a cutting edge and unique floating image display right on your glass. Definition Pro Rear Projection films offers high contrast images in any ambient lighing conditions and a next generation look to any content, either full motion video or static images will float on your clear glass or acrylic. Definition Pro Projection film is now a top seller of ours for because of the versatility and stopping power it adds to your display. Definition Pro Rear Projection Film is compatible with 99.9% of every projector make and model available and you can be assured that our film is ready to use with yours or one you purchase. For questions and answers regarding rear projection film and projectors read our FAQ or Email Us. Definition Pro rear projection film applies to the inside of your glass or display much like a window tint product does, Definition Pro projection film requires an application fluid, use of a professional installer or our standard or Pro DIY application kit is recommended for best results.

http://www.ssidisplays.com/rear-projection-film

Rear Projection Film Accessories - Touch Films

Adding interactivity to a Rear Projection film and having it work through almost any glass or acrylic surface is as simple as adding a touch foil to your display. Touch foils are applied to the glass first, then you add your rear projection film to the backside of the touch foil and users can interact through store front windows, car windows and much much more

Rear Projection Film Accessories - Window Speakers

Window Speakers are a great way to take your rear projection film project to the next level, Window speakers can turn any solid surface into a speaker and give rear projection film displays the ability to communicate with dynamic digital signage and sound.

Interactive Definition Rear Projection Film

Definition Rear Projection Film can be used in interactive displays in a number of ways, using touch foils you can make through glass touch screens to turn any window, glass or acrylic display interactive. Multi Touch overlays can also be sued with rear projection films to create large scale interactive displays, floating image interactive displays and more. The many uses of rear projection films in interactive applications is only limited to your imagination as the technology is currently available to bring imaginations to life.

DIY Rear Projection Films

DIY Rear Projection Films is becoming more common as the projection films themselves have built in adhesives and with the right application fluid and squeegee anyone can install the films themselves, we provide not only the rear projection films but also application fluid and squeegees for the best DIY installation

Intrigue Rear Projection Film

I

ntrigue Rear-Projection Film is a clear, holographic Projection Film that is 96% +/- colorless or transparent.  When combined with a standard projector, Intrigue produces a holographic, 3D, or floating image effect on any glass or acrylic surface.  It maintains wide viewing angles and impressively bright images while contributing a "next generation" look and feel to any content.



The Intrigue Series is a line of holographic Rear-Projection Films and Rigid Screens.  The creative advantage to you is a wide range of projection possibilities in extremely diverse projection environments.  It is being used in Trade shows for futuristic displays that command attention.

Rear Projection Film Application

Rear Projection films application is not a scary or unreasonable task for anyone to DIY, there are some basic rules to follow and the most important is using the correct application fluid and a proper squeegee For more information on this or any topic relating to rear projection films feel free to contact us at 1-888-631-5880

Rear Projection Film back side viewing

We get asked all the time how the image on the back side of the rear projection film will look when the display is being used, this is not the easiest question to answer because there are many variables that need to be addressed

Ambient lighting – this plays a huge role in how the back side of the film will look, if ambient lighting is low then the image on the back side will be more visible, if the ambient light is high such as a store front window with direct sunlight the rear side image will be less visible

The Rear Projection Film you choose – just like ambient light the film you are projecting on plays a huge role in this, Accent and Intrigue films are less likely to have a rear side viewable image than Definition or Definition Pro films would be because they block less light out from the front and rear

Projector/Lumens – the projector you choose and the amount of lumens you throw at the rear side of the film will increase or decrease the rear side view in low ambient light and high ambient light and on any of the films, this also varies based on the size of the image you are projecting. Best bet is to speak with one of our customer service representatives and they will help you specify the correct film and projector for your installation location

Intrigue Rear Projection Film Adhesives

Intrigue Rear Projection Film can be applied to any clear surface including glass, acrylic and plexiglas for a cutting edge and unique floating image display right on your glass. Intrigue Rear Projection films offer a next generation look to any content, either full motion video or static images will float on your clear glass or acrylic giving you what many describe as a holographic look and feel to your content. Intrigue Rear Projection Films are best suited for controlled lighting conditions or for shop windows that will be projected on from dusk to dawn. Intrigue Projection film has been a top seller of ours for years because of the versatility and stopping power it adds to your display. Intrigue Rear Projection Film is compatible with 99.9% of every projector make and model available and you can be assured that our film is ready to use with yours or one you purchase. For questions and answers regarding rear projection film and projectors read our FAQ or Email Us. Intrigue rear projection film applies to the inside of your glass or display much like a window tint product does, Intrigue projection film requires an application fluid, use of a professional installer or our standard or Pro DIY application kit is recommended for best results. http://www.ssidisplays.com/rear-projection-film

Rear Projection Films Adhesives

Rear Projection Film adhesives are much like a window tint adhesive are and apply in similar ways, one of the most important things to remember about dealing with Rear Projection Film Adhesives is that you should not ever just use plain water to install your rear projection film. The right Application liquid and squeegee will ensure a proper installation and removal of all the application fluid and air from under your rear projection film 

Rear Projection Films For Glass

Rear Projection Films for glass and acrylic give you the ability to turn any clear surface into a rear projection display, these paper thin rear projection films apply to the rear side of your glass or acrylic and using any standard projector you can display static images, full motion video, Satellite, cable and over the air TV channels with no problem.

There are different types of rear projection films that give different effects and work in different situations to give you the best possible rear projected image, to ensure you get the right product for your install or project make sure you turn to experts who not only sell rear projection films but have also installed them and worked on projects involving more than just the projection film side but also the projectors and installation of them to get your best results.

Rear Projection Film Pricing

Rear Projection Film pricing varies buy the type of film you want to purchase as well as how you would like to order it, you can purchase rear projection films by the cut Size (cut sizes are measured diagonally just like standard monitors and TV displays) by the roll (a standard roll is 60” in width by 33’ in length) or by the foot (purchasing by the foot would equal 1 foot by 5 feet and so on)

For dealers, distributors and resellers buying by the foot or rolls is a good way to go because you can cut the screen sizes you need and use the leftovers for samples or test pieces, for consumers or one off projects ordering by the cut size is a great way to ensure you get factory cuts and correct dimensions for aspect ratios and screen sizes.

We offer drop ship services for dealers, distributors and resellers, all our films are in stock and we offer a standard turnaround time of 48 hours or less from time of order to shipment 

Transparent Rear Projection Films

Transparent Rear Projection Films give you the ability to create true floating full motion or static image displays, the Rear Projection films are 97% clear so when not being projected on your clear glass or acrylic can still be used to display products. Transparent Rear projection films can also be used with touch films and touch frames to create a holographic touch screen experience. 

Rear Projection Screen Films

Rear Projection Screen Films take the rigid rear projection screen products and put it into a film version that can be applied to any glass or acrylic surface. Rigid rear projection screens we the staple of store front window displays for years but did cost more to pack and ship because they had to be crated and ship via freight for most standard sizes, Rear Projection Screen films are able to be rolled and shipped in tubes or boxes and even full rolls of 60”x33’ can be shipped with standard shipping companies for cost effective delivery. Using a Rear Projection Screen film on glass or acrylic gives you the same effect as a rigid rear projection screen would but with less shipping and crating costs.

Anti Glare Film Packaging for Rear Projection Films

Anti Glare films are shipped in tubes or tubes in boxes to ensure safe delivery to our clients worldwide. Having

 shipped Anti Glare films all over the world we have learned the best way to ensure your Anti Glare film arrives safely, and also how to package correctly in case the shipping companies do damage your Anti Glare film in shipping you are able to file a claim and get your product cost and shipping refunded and Anti Glare film replaced.

Definition Pro Film Packaging

Definition Pro rear projection films are shipped in tubes or tubes in boxes to ensure safe delivery to our clients worldwide. Having shipped Definition Pro rear projection films all over the world we have learned the best way to ensure your Definition Pro rear projection film arrives safely, and also how to package correctly in case the shipping companies do damage your Definition Pro rear projection film in shipping you are able to file a claim and get your product cost and shipping refunded and rear projection film replaced.

Rear Projection Film Packaging - Intrigue Rear Projection Films

Intrigue Rear Projection films are shipped in tubes or tubes in boxes to ensure safe delivery to our clients worldwide. Having shipped Intrigue rear projection films all over the world we have learned the best way to ensure your Intrigue rear projection film arrives safely, and also how to package correctly in case the shipping companies do damage your Intrigue rear projection film in shipping you are able to file a claim and get your product cost and shipping refunded and rear projection film replaced.

Rear Projection Film Packaging - Accent Rear Projection Film

Rear Projection films are shipped in tubes or tubes in boxes to en

sure safe delivery to our clients worldwide. Having shipped rear projection films all over the world we have learned the best way to ensure your rear projection film arrives safely, and also how to package correctly in case the shipping companies do damage your rear projection film in shipping you are able to file a claim and get your product cost and shipping refunded and rear projection film replaced.

Rear Projection Film By The Foot - Intrigue Rear Projection Film

Intrigue Rear Projection Film can be purchased by the linear foot, this option gives you the ability to purchase as much rear Intrigue projection film as you may need for the project you are working on and also gives you the ability to trim and keep the cut pieces for smaller projects or testing as needed. Purchasing is simple choose the Intrigue rear projection film, add the right amount of feet you need to the cart 1-100 feet at a time and check out. Your Intrigue rear projection film will be cut packed and shipped, we carry stock of all of our rear projection film and our standard lead-time is 48 hours or less during the normal work week

Rear Projection Film By The Foot - Definition projection film

Definition Rear Projection Film By The Foot

Definition Rear Projection Film can be purchased by the linear foot, this option gives you the ability to purchase as much rear Definition projection film as you may need for the project you are working on and also gives you the ability to trim and keep the cut pieces for smaller projects or testing as needed. Purchasing is simple choose the Definition rear projection film, add the right amount of feet you need to the cart 1-100 feet at a time and check out. Your Definition rear projection film will be cut packed and shipped, we carry stock of all of our rear projection film and our standard lead-time is 48 hours or less during the normal work week

Projection Film by The Foot - Accent Rear projection film

Accent Rear Projection Film can be purchased by the linear foot, this option gives you the ability to purchase as much rear

 projection film as you may need for the project you are working on and also gives you the ability to trim and keep the cut pieces for smaller projects or testing as needed. Purchasing is simple choose the Accent rear projection film, add the right amount of feet you need to the cart 1-100 feet at a time and check out. Your Accent rear projection film will be cut packed and shipped, we carry stock of all of our rear projection film and our standard lead-time is 48 hours or less during the normal work week

Rear Projection Film Application Kits

Rear Projection Film application kits make the difference of night and day during the installation process of your rear 

projection film, the correct application fluid and the squeegee ensure the best possible outcome when installing rear projection films yourself. 

One of the main things to remember about installing rear projection films is you cannot use regular water during the installation process, using regular water will result in bubbles left under the film and greatly increase your chances of having to pull and re apply new film.

The correct squeegee gives you the ability to press firmly and pull all the application fluid out from under the rear projection film without damaging the rear projection film surface. 

Rear Projection Films- Buying by the roll

Buying rear projection films by the roll has never been easier simply visit the rear projection film page that you are looking

 to purchase and click on roll pricing cart and choose how many rolls that you need, check out and your rolls of rear projection film will be shipped out with 48 hours of ordering.

Rear Projection Film Buying cut sizes

Buying rear projection films by the cut size has never been easier simply visit the rear projection film page that you are 

looking to purchase and click on the either the 4:3 or 16:9 carts and choose the diagonal cut size that you need.

Rear Projection Film by the foot

Purchasing Rear Projection Films by the foot is as easy as deciding how many feet you need from 1-100 and

 adding that many feet in you paypal cart. Rear Projection films come in a 60” width so purchasing 1 foot of film means you would receive 60”x1’ of the rear projection film of y our choosing

Installing Rear Projection Film

Rear Projection Film installs much like a vehicle or commercial window tint product would, Rear Projection Films require an application fluid and we recommend specific squeegee types to an effective rear projection film installation.

This video is part of a series on Rear Projection Films where you can learn tips, tricks, install ideas and information regarding Rear Projection Films in general and for each specific rear projection film type we carry

For further information visit www.rearprojectionfilms.com or call 1-888-631-5880

Rear Projection Film - Definition Pro rear projection film 3

www.rearprojectionfilms.com
More information on Definition Pro rear projection films 

Rear Projection Film - Definition Pro film 2

www.rearprojectionfilms.com
More information on Definition Pro rear projection films 

Rear Projection Film - Definition Pro Film

www.rearprojectionfilm.com

Definition Pro rear projection film is the professional choice for high quality rear projection film installations

What is Rear Projection Film?

Rear Projection Film material is much like a window tint product would be for commercial windows or vehicles, except this rear projection material is specifically designed to catch projected light from a video projector. Projectors can display anything from video, computers, DVD players, satellite feeds, cable TV and more, Rear projection films give you the ability to put a display on any piece of glass or plastic available and create one of a kind digital signage display.

This video is part of a series that explains not only what Rear Projection Films are and how they work but also how to apply, maintain and get the most out of your rear projection film purchase.  

Rear Projection Film Application

Rear Projection Film Application

You will need the following before you start the process of installing your Rear Projection Film 

You may want to get samples of Rear Projection Films to test with, you can do that here

·         A film aid application concentrate (or no-tears baby shampoo)

·         Bottled water (not tap water)

·         Spray bottle

·         Squeegee

·         Single-edged razor blade (for cleaning glass)

·         Ruler or tape measure

·         Soft, lint-free cloth or paper coffee filters (for cleaning the glass and projection film)

·         Purchasing a rear projection film application kit is a great way to get everything you need at once! Get one here

Before You Begin:

Rear Projection films are applied directly to the inside glass surface you can touch inside your home or business.

Applying Rear projection film is a simple process, with only a few basic steps. However, patience and preparation are very important. Before beginning this project, please read the instructions completely and carefully.

Preparation:

a. Fill a pump- or trigger-spray bottle with a soapy water solution: to 1qt. bottled water, add a bottle of a film aid concentrate (or 1/4 tsp of a no-tears baby shampoo without conditioner). Film Aid offers the best drying clarity and pH balance. Do not use hard tap water, which can leave spots under your projection film. VERY IMPORTANT: This soapy water solution (“the Solution”) will serve as a lubricant for the squeegee during glass cleaning, projection film application, and future cleaning. CAUTION: Do not use any household glass cleaner containing ammonia or vinegar to clean the glass or projection film; such cleaners can dilute or dissolve the projection film’s adhesive. However, extremely greasy or smoke-covered windows may need to be cleaned first with glass cleaner then rinsed thoroughly with the Solution.

b. Plan to use several single-edge utility razor blades to clean the window. A small utility knife with breakaway blades is the best tool for trimming your projection film. NOTE: Projection film can dull a blade edge quickly; and a dull blade can tear your projection film. Plan to use a new blade after every 10’ of film that you cut.

c. A rubber-blade squeegee is necessary to press your projection film onto the window without creases and to remove the soapy water from under your film. We recommend a squeegee between 6” to 8” wide, preferably with a flexible blade and solid handle. A quality squeegee is a good investment because you will use it to clean the glass, apply your projection film, and clean your projection film in the future.

d. Use lint-free toweling (paper coffee filters work amazingly well!), not paper towels, to clean the windows and absorb squeegeed water.

Special Points to Remember

·         Handle your rear projection film very carefully. As with aluminum foil, once creased, the film will remain creased.

·         Avoid using concentrated or degreasing detergents to make the Solution or the film may dry cloudy or fail to adhere.

·         Screens larger (3-4’ wide) usually are best applied by two people working together to remove the liner, install, and trim the projection film. (See steps 3 and 5)

·         Apply your projection film anytime other than in direct sunlight (film may stick too quickly) or freezing weather (film will not stick at all). Best temperature is 45-90 degrees F. Best time is early morning or late evening, when the glass is cooler.

·         Work in a dust-free area. Turn off fans. Apply projection film to windows hung vertically. DO NOT lay windows down to tint them or you will trap air bubbles under the rear projection film.

·         Rear Projection film may be removed, but is not covered under warranty if removed.

Application:

1. Measure the Window

Measure the dimensions of your window carefully before unrolling and cutting your projection film. Rear Projection film may be applied from side to side, or top to bottom. Use the measurement that leaves the least waste (unless your rear projection film is cut to size). You may also choose to pre trim your film to the window dimensions, less 1/16” on all sides (see steps 3 and 8 below).

2. Clean the Window

Generously spray the window with the Solution. (You will use this solution throughout the installation process.) Then use your hand and squeegee to clean the windows thoroughly. Re spray the glass, then use a razor blade to remove any caked dirt or paint. Use special care cleaning the corners. Re-wet the window, then squeegee downward. Wipe off accumulated dirt from the window gasket with a soft cloth or paper coffee filters. Repeat process until the glass is clean. If possible, also clean the outside to ensure total clarity. (NOTE: Paper coffee filters are lint free and can be used to clean the windows now, and the film later. Remember, the cleaner the glass, the better the final appearance of your applied rear projection film.)

3. Cutting your projection Film

Unroll your rear projection film on a clean, flat surface near the window. Use a ruler as a guide and cut the film 1” larger than the dimensions of the window to be sure that the film will fit (if you are filling a entire window. Of course, you may wish to use the factory edge of the film for one side of the window. Or, if you choose, pre trim the film to the final dimensions of each screen size.

For Windows Larger Than Film Size: (seaming your rear projection film)

To cover larger windows, you may need to seam the rear projection film as you would seam wallpaper. To obtain a perfect butt seam, vertically overlap two sides of the film, then use a ruler as a straight edge to guide your knife as you cut through the center of both layers of film. After cutting the seam line, peel the loose sheet of film from the top, then lift the edge of the projection film and slide out the other “waste” piece from underneath the film. Rewet the glass, lay down the film, rewet the top of the film, and then squeegee the film from top to bottom in a slow, firm vertical motion. A week after installation, you should waterproof the seam with a coat of clear fingernail polish.

4. Wet the Window Thoroughly

Generously spray the solution, which acts as a lubricant for the rear projection film, onto the inside surface of the window until beads of the soapy water run down the glass. If the window becomes dry, rewet it completely before applying your rear projection film.

5. Remove the Clear Film Backing (“the adhesive liner”)

Take your time with this step: be patient and be careful not to crease the projection film while removing the clear, protective “liner” from the back (adhesive side) of the film. (NOTE: Usually the liner is on the outside surface of the film roll.)

As you carefully peel the liner away, generously spray the soapy solution onto the exposed adhesive. This spray helps break any static cling, reduces contamination, and makes the liner separation easier. Wet your hands with the Solution before handling your rear projection film to avoid leaving fingerprints on the adhesive. For small windows, remove the liner diagonally, from one corner toward the opposing corner. Try to keep the film from touching itself. Two people should coordinate the liner separation on a large screen size.

6. Placing your rear projection Film on the Wet Window

Completely remove the clear liner from the back of the rear projection film and thoroughly wet the exposed, dry adhesive surface. Be sure the window is dripping wet: too much Solution is better than not enough. Apply the adhesive side of the projection film to the wet glass. Start at the top of the window, then allow your rear projection film to gently lay down onto the glass. Handle your projection film carefully at the corners to avoid wrinkles or creases, which cannot be removed. Use your hands to smooth the film onto the glass. You can slide the film around and position it correctly so long as the window and film are thoroughly wet.

7. Spray the Outside Surface of your rear projection Film and Squeegee your Film Carefully and Firmly

Spray the entire surface of the rear projection film facing you with the soapy solution to lubricate its surface. Using a clean rubber squeegee, begin squeegeeing the water and air out from under the film. To do this, start about 2” from the top and side and squeegee from left to right. Second, to set the projection film on the glass, lightly squeegee the rest of the film downward, but leave the 2” perimeter area unsqueegeed. If you need to remove large air pockets, rewet the top of the rear projection film and squeegee again. If the squeegee drags, re spray the Solution on the top of the projection film. (NOTE: Always wet your rear projection film with the solution before squeegeeing. You can remove any large bubbles by pushing them with the squeegee to the nearest film edge. Small bubbles (less than 1/8” in diameter) should disappear in a few days.)

8. Trim Edges of your projection Film and Squeegee Dry

Use a sharp razor blade or utility knife and a 1/16” wide guide to trim your projection film around the four perimeter edges of the projection film. This gap is essential for the proper thermal expansion of the glass and allows you to completely squeegee the water and air from under the film. Rewet the entire rear projection film surface and squeegee again. Press very firmly to remove all the water so that the adhesive can cure clearly.

This time, imagine an invisible line dividing your rear projection film from top to bottom. Starting at the top of the window, squeegee from the center to the left, then from the center to the right. Repeat this process until you reach the bottom of the window. (NOTE: If your squeegee has a stiff blade, PUSH it toward the sides. If a flexible rubber blade, PULL the squeegee.) If “fingers” appear along any edge, wrap your squeegee with a few paper coffee filters (or soft, absorbent cloth) and carefully push the “fingers” toward the edge of the film. Hold in place to absorb any excess water.

www.rearprojectionfilms.com

Highly sophisticated paper thin projection screen material

Rear Projection Film is a highly sophisticated paper thin projection screen material for video on glass applications, we have intricately compressed our rigid projection screen technology down into this amazing digital video on glass display film. It is best described as a window tint like material with water activated adhesive that can be applied to any clear and even tinted glass or acrylic surfaces, transforming even the most standard storefront or retail windows into animated digital displays.

This video on glass rear projection film comes in a variety of colors all with unique characteristics and performance benefits; Dark or Definition rear projection film is designed to add contrast and depth to your images it can also be used in direct sunlight applications on storefronts and retail displays. White or Accent rear projection film is an impressive screen that can handle most any extreme application it is presented with. This rear projection film screen has been used in some of the biggest names in retail including Estée Lauder, Bare Escentuals and many more to create stunning and unique digital signage displays that captivate, inspire and engage perspective buyers; this is a condensed version of our Accent rigid screen. Clear and Transparent Intrigue Film is just as it is described intriguing – this projection film has been used in many high end retail chains such as De Beers Jewelry Stores and Microsoft Stores to create one of a kind award winning video on glass displays that are sure to stop and attract potential buyers; this rear projection film screen is of similar technology to our Intrigue rigid rear projection screen yet paper thin.

SSI Adhesive Rear Projection Films are stocked on 60” wide rolls and 33’ in length giving you 122” seamless widescreen displays.

Interactive options are available and can be incorporated into any application utilizing rear projection films; simply apply a thin glass touch screen film to your substrate and then apply your projection film onto the touch film. This thru glass touch screen solution in conjunction with rear projection screen technology can transform any storefront into an interactive digital display in a matter of an hour or so; sizes available up to 116” widescreen

Rear Projection Film Technology

Video on glass is not a new concept in projection just a new application and style, Screen Solutions has been projecting video onto glass since 2005. Rear projection films have come a long way since then and are now very thin and now offer a very high resolution image that has an , rear projection films also offer greater options for applications because of the built in adhesives and easy application method. Rear projection film is a little thicker than a piece of paper and is specifically designed for a projected image to be accept and evenly dispersed across the screen.

Different projection films offer different optical properties and also different viewing types

• Intrigue film is a clear or transparent film offering 97% transparency while maintaining image quality
• Definition film offers ultra high contrast (independent of your projectors contrast value) and also works very well in uncontrolled lighting situations
• Accent film is a ultra bright rear projection film that works very well in any setting from uncontrolled lighting to more complicated projection designs with short throw lenses and mirror rigs.

• Anti Glare Film is often a much needed accessory to projection film on glass applications where glare is overwhelmingly detracting from your view-ability.

All of this adds up to rear projection film being a leader in the projection market and growing as the preferred option for digital advertising in unique and out of the box extraordinary applications. For a product demonstration and or more information please call Screen Solutions at 888-631-5880

Rear Projection Film information - Intrigue rear projection films

Intrigue Rear-Projection Film is a clear, holographic Projection Film that is 96% +/- colorless or transparent.  When combined with a standard projector, Intrigue produces a holographic, 3D, or floating image effect on any glass or acrylic surface.  It maintains wide viewing angles and impressively bright images while contributing a "next generation" look and feel to any content.

The Intrigue Series is a line of holographic Rear-Projection Films and Rigid Screens.  The creative advantage to you is a wide range of projection possibilities in extremely diverse projection environments.  It is being used in Trade shows for futuristic displays that command attention.  Intrigue transparent Rear-Projection Film can also be used with today's latest Touch-Screen technology.  Our Through-Glass Touch Films turn a clear, non-conductive material into a Touch-Screen surface with holographic qualities.

Screen Solutions stocks the industry's largest sizes of seamless Films, and has them available in cut sizes or full rolls for quick shipping domestically or internationally.  Films can be be purchased in seamless sizes up to 120" diagonally, and in either 4:3 or 16:9 ratios.

All Screen Solutions Projection Films adhere to any glass or acrylic - similar to a window tint.  Installation is a simple process requiring only SSI Application Fluid, a spray bottle, and hard squeegee - do not use water to install.  We recommend installing Intrigue Rear-Projection Film with our SSI PRO Application Kit.

Intrigue Holographic Rear-Projection Film

Technical Specifications:

 

• Screen Color: Clear 96% +/-
• Transmission of light: 92%
• Maximum size (seamless)
  
  • 122" Diagonal 16:9 Aspect Ratio (60"x107")
  • 100" Diagonal 4:3 Aspect Ratio (60"x80")
• Intrigue Rear-Projection Film - Full Roll 60"x33'
• Custom Roll lengths available - Call 888-631-5880

Typical Screen Size Dimensions by Aspect Ratio:

Widescreen Sizes:

Diagonal Measurement/Aspect Ratio/Dimensions

• 35" 16:9 ratio (17 x 30)
• 42" 16:9 ratio (20 x 36)
• 84" 16:9 ratio (41 x 73)
• 50" 16:9 ratio (24 x 43)
• 60" 16:9 ratio (29 x 52)
• 67" 16:9 ratio (32 x 58)
• 80" 16:9 ratio (39 x 69)
• 84" 16:9 ratio (41 x 73)
• 92" 16:9 ratio (45 x 80)
• 98" 16:9 ratio (48 x 85)
• 100” 16:9 ratio (49 x 87)
• 120” 16:9 ratio (59 x 104)

Standard Sizes:

Diagonal Measurement/Aspect Ratio/Dimensions

• 35" 4:3 ratio (21 x 28)
• 42" 4:3 ratio (25 x 33)
• 50" 4:3 ratio (30 x 40)
• 60" 4:3 ratio (36 x 48)
• 67” 4:3 ratio (40 x 53)
• 80" 4:3 ratio (48 x 64)
• 84” 4:3 ratio (50 x 67)
• 92” 4:3 ratio (55 x 73)
• 100” 4:3 ratio (60 x 80)

Transparent Rear-Projection Film Applications:

• Trade show Displays
• In-store Displays 
• POP Displays 
• Lobbies
• Boardrooms 

Transparent Rear Projection Film Accessories:

• Rear-Projection Film Application Kit
• PRO Rear-Projection Film Application Kit
• Window Speakers
• Touch-Film
• Multitouch-Frame

Q&A

What does "Holographic Like Image" mean?  Holographic Theory suggests that reality, as we consciously experience it, is an illusion.  Intrigue Rear-Projection Film seats 3D images, onto glass and plastic, that seem to float in space - suspended in a "dream-like" state of existence.  

How transparent is Intrigue?  When we say transparent or clear, we 96%+/- clear mean it! Projections onto Intrigue appear vivid, however when void of a projected image, Intrigue is barely noticable.  Most people do not even detect Intrigue Film on the surface of glass.

What projectors work with Intrigue?  Most any Projector will work with Intrigue Rear-Projection Film.  While we do have our favorites, for various reasons, yours will work with Intrigue 99% of the time.  Please contact us with questions or concerns regarding compatibility.  

Specific Projection Angle Required?  We are frequently asked if a specific projection angle is required to get good results.  The short answer is "NO," however, we do have a few suggestions for optimum performance.  Intrigue is clear, so placing the projector directly behind the screen is not recommended as it will shine into the viewers eyes.  Ideally, you want to project from high to low, or low to high, at the steepest angle your Projector can accommodate with keystone correction.

Definiton Rear Projection Film Information

Definition Rear-Projection Film has high-contrast properties, wide viewing-angle capability, and eliminates hot-spotting.  Definition is available in large, seamless sizes - up to 122" diagonally and in a choice of either 4:3 or 16:9 ratios.  Tile-installation allows for even larger Digital Displays! Create an instant Rear-Projection Display by applying Definition Film to any glass or acrylic surface - built-in adhesives expedite installation.  Definition Film gives you the freedom to to display your content in stunning fashion. 

To combat high ambient light conditions, we recommend a combination of Definition Film and our Anti-Glare Film to improve image quality and reduce glare on the viewing side of your display.   

Definition Rear-Projection Film is being used in Retail environments to turn static glass and banners into Digital Displays that captivate!  Add our Touch-Film technology to Definition Film and transform your Storefront window into an inter-active experience - engaging your customers even before they enter your store!  Keeping content fresh and exciting is as easy as updating a Digital Signage controller. 

Screen Solutions stocks the industry’s largest sizes of seamless Films and has them available in cut sizes or full rolls for quick shipping domestically or internationally. 

All SSI Films adhere to any glass or acrylic - similar to a window tint.  Installation is a simple process requiring only SSI Application Fluid, a spray bottle, and hard squeegee - DO NOT use water to install.  We recommend SSI Pro Rear-Projection Film Installation Kit

Definition Rear-Projection Film - TECHNICAL SPECIFICATIONS 

• Screen Color: Dark Grey
• Transmission of light: 75%
• Max Viewing Angle: 175
• Full Roll 60"x33' (additional lengths available upon request)
• Maximum Diagonal Size (seamless)
  
  • 122" 16:9 (60"x107")
  • 100" 4:3 (60"x80")

Typical Screen Size Dimensions by Aspect Ratio:

Widescreen Sizes:

Diagonal Measurement/Aspect Ratio/Dimensions

• 35" 16:9 ratio (17 x 30)
• 42" 16:9 ratio (20 x 36)
• 84" 16:9 ratio (41 x 73)
• 50" 16:9 ratio (24 x 43)
• 60" 16:9 ratio (29 x 52)
• 67" 16:9 ratio (32 x 58)
• 80" 16:9 ratio (39 x 69)
• 84" 16:9 ratio (41 x 73)
• 92" 16:9 ratio (45 x 80)
• 98" 16:9 ratio (48 x 85)
• 100” 16:9 ratio (49 x 87)
• 120” 16:9 ratio (59 x 104)

Standard Sizes:

Diagonal Measurement/Aspect Ratio/Dimensions

• 35" 4:3 ratio (21 x 28)
• 42" 4:3 ratio (25 x 33)
• 50" 4:3 ratio (30 x 40)
• 60" 4:3 ratio (36 x 48)
• 67” 4:3 ratio (40 x 53)
• 80" 4:3 ratio (48 x 64)
• 84” 4:3 ratio (50 x 67)
• 92” 4:3 ratio (55 x 73)
• 100” 4:3 ratio (60 x 80)

Definition Film has been used around the world in many applications and environments.  A few of the most common applications are:

• Retail windows 
• Lobbies 
• Museums 
• Kiosks 
• Tradeshow displays 
• Corporate briefing centers 
• Bank windows
• Digital signage
• Restaurants
• Real estate window displays

Accent Rear Projection film information

Accent is a white, Rear-Projection Film with a high level of light transmittance.  Accent produces very bright, crisp images in any lighting environment.  Accent requires no specific projection angle and can be used with standard, short, and long-throw projector lenses.  When used in direct sunlight applications, we recommend adding SSI Anti-Glare Film for better image visibility.  In turn, images seen through tinted glass are not only possible, but bright and clear due to Accent's light transmittance properties.  Contact an SSI representative for more details.

Accent is available in large, seamless sizes - up to 120" diagonally and in a choice of either 4:3 or 16:9 ratio.  From retail environments to corporate settings, the SSI Accent Rear-Projection Film Screen has an indefinite capacity for use and application - limited only by your imagination!  Tile-installation allows for even larger digital displays!

Screen Solutions stocks the industy's largest sizes of seamless Films and has them available in cut sizes or full rolls for quick shipping domestically or internationally.

All SSI Films adhere to any glass or acrylic surface - similar to a window tint.  Installaiton is a simple process requiring only SSI Application Fluid, a spray bottle, and hard squeegee - do not use water to install.  We recommend our SSI PRO Application Kit.

Accent Rear-Projection Film Technical Specifications:

• Screen Color: Frosted White
• Transmission of Light: 79%
• Maximum Viewing Angle:  175
• Maximum Size (seamless)

       122" Diagonal 16:9 (60"x107")  

       100" Diagonal 4:3 (60"x80")

• Accent Rear-Projection Film:  Full Roll 60"x33'
• Custom Roll Lengths Available upon Request - Call 888-631-5880.

Typical Screen Size Dimensions by Aspect Ratio:

Widescreen Sizes:

Diagonal Measurement/Aspect Ratio/Dimensions

• 35" 16:9 ratio (17 x 30)
• 42" 16:9 ratio (20 x 36)
• 84" 16:9 ratio (41 x 73)
• 50" 16:9 ratio (24 x 43)
• 60" 16:9 ratio (29 x 52)
• 67" 16:9 ratio (32 x 58)
• 80" 16:9 ratio (39 x 69)
• 84" 16:9 ratio (41 x 73)
• 92" 16:9 ratio (45 x 80)
• 98" 16:9 ratio (48 x 85)
• 100” 16:9 ratio (49 x 87)
• 120” 16:9 ratio (59 x 104)

Standard Sizes:

Diagonal Measurement/Aspect Ratio/Dimensions

• 35" 4:3 ratio (21 x 28)
• 42" 4:3 ratio (25 x 33)
• 50" 4:3 ratio (30 x 40)
• 60" 4:3 ratio (36 x 48)
• 67” 4:3 ratio (40 x 53)
• 80" 4:3 ratio (48 x 64)
• 84” 4:3 ratio (50 x 67)
• 92” 4:3 ratio (55 x 73)
• 100” 4:3 ratio (60 x 80)